Super Sucker
VT3300D W/D
Features
GVW
33000kg
Brand
FLOWTECH
Power
400HP
Emission standard
EURO V
Equipment
fire extinguisher
What are industrial vacuum trucks?
A dry and wet substances vacuum truck works on the principle of pneumatic transport (air movement). The vacuum tank on the vacuum truck is placed under negative pressure by the large amount of air displacement created by the blower. The air loses its speed in the tank due to the volume increase, as a result, it will no longer be able to carry large quantities of product. In particular, heavier particles will drop down. The air and product is then thrown against the bottom of the vacuum tank, so the speed decreases even more and even more product drops down. This is why dry substances trucks are also called air movement trucks.
The vehicle adopts outstanding chassis with GCC certificate. Used for the suction, discharging and transporting powdery dry, wet and and hazardous industrial waste. This machine performances well on handling catalysts, gravel, lime powder, fly ash and sludge, etc., suitable for handling hazardous and polluting substances
- Equipped with top brand of ROOTS blower pump with tri-lobe rotors and lateral injection cooling system, the whole system brings high vacuu m level, large air flow and low noise. This machine can be easily used in complex scenarios such as long distances and ultra-high suction lifts.
- Remote control operated suction boom telescope, lift up and down, and rotate left and right. It has strong adaptability to the working environment and can effectively reduce the labor intensity and danger of the operator
- Cyclone fine dust removal system meets less suction resistance compared to traditional bag dust removal system, the suction efficiency is enhanced, and the suction application scenarios are greatly improved.
- Automatic cleaning and recovery system works on the cyclone fine dust removal system, improve the vehicle operation efficiency.
Standard technical Features
Pressure/vacuum tank
- Volume : 12m3
- Material : stainless steel 316L
- Shape : cylindrical
- Shell thinkness : 5mm
- Dish end thickness : 5mm
- Designed vacuum pressure : 100%
- Working pressure : -0.9bar
- Reinforcement : cold roll forming U-shape, around the outer of the tank body
- Front tipping cylinder : max angle 45°
- Loaded material detector : electronic wet and dry material level detector to detect material height
- Pneumatically vibrator : prevent dust from clumping
- Nitrogen inlet : for flammable material discharge protection
- Safety accessories : overpressure safety valve, vacuum safety valve, rupture disc, pressure record
- Other accessories : open manhole cover, ladder, folding safety handrail, anti-slip
- walkway board, rear door anti pinch protection, fire extinguisher
- box, beacon work light, anti rollover protection, tank safety
- support, electrostatic grounding plate system, billboard
Loading methonds
- Swivel boom : remote control valve on swivel boom on top
- Rear valve : manuanly controlled rear valve
Rear door
- Operate : hydraulically operated
- Locking : locking cylinders 6units
- Seal : Rigid and rubber sealing rings
- Valves : 6inch convert to 4inch, stainless steel ball valve
Dust removal system
- Inertial dust collector : removes large particles of dust
- Secondary cyclone fine dust separator : two sets, remove fine dust
- Fine dust treatment system : unique cyclone separator fine dust treatment system, removes fine dust
- Automatic cleaning and recovery system : automatically recover materials in the cyclone separator bin into the rear
- material bin, and automatically cleans the cyclone separator
Remote control suction boom
- Diameter : 6 inches
- Installation : top
- Material : stainless steel 304 and flexible rubber hose
- Operate : rotate horizontally, lift up and down, extend and retract
- Control : remote control within 100m distance, manual control also available
Compressor system with nitrogen discharge
- Drive : hydraulically driven
- Working pressure : 2.5bar
- Air flow : 154m3/h
ROOTS blower pump★
- Type : ROOTS
- Feature : with tri-lobe rotors and lateral injection cooling system
- Air flow : 6100m3/h
- Max vacuum level : 90%
- Pump protection : fine dust removal system and automatic vacuum relief valve
Subframe
- Subframe : is made of high-strength steel and installed according to the chassis structure
- Hinge axis : strong and flexible hinge device on the rear side of the tank.
- Tank supports : meet safety standards
Hydraulic device
- Hydraulic pump : hydraulic pump required for installation
- Oil tank : large capacity oil tank
- Control : hydraulic commands are used to open and close the high-pressure flushing water pump
open/close the rear door; lift the tank; extend / retract the suction boom, lift and lower, rotate left/ right
Additional safety features
- Emergency stop : emergency controls are located on the main control panel
- Emergency aeration : electronic control, to achieve emergency aeration when PLC system fails
- Work lights : two work lights can be installed on the front and rear ends of the vehicle.
- Bumper : heavy-duty vehicle anti-collision bumper is installed on the rear of the vehicle.
Control
- Controls : all easy-to-operate controls provided
- Installation : all control components and installation locations can be determined by the user
- Controls : all controls are housed in a stainless steel tool box
- Marking : the entire vehicle is clearly marked on the required parts
More information?
Please contact us!
Do you have a question about the Flowtech or comment about our products and services?
Just get directly in touch with our Customer Service desk
Applications for use of wet substances in vacuum equipment
- Emergency clean-up
- Technical chemical cleaning
- Industrial cleaning
- Offshore activities
- Oil separation
- Onshore activities
- Ship cleaning
- Petro-chemical activities
- Well cleaning
- Sewer cleaning
- Septic tank cleaning
- Shutdown cleaning work
- Silo cleaning
- Soil boring
- Transport work
- Vacuum cleaning work
- Grease pit cleaning
- Water surface cleaning
- Collection of waste oil
- Municipal cleaning
- Pressuring liquids